Technical documentation regarding the communications of the CNC equipment serviced by The Service Group.

 

Fanuc Serial Cable Wiring for a 25pin-9pin Cable

Here is the wiring diagram for RS-232 Serial Compmunications Cable, 25 pin to 9 pin, for connecting a computer to a Fanuc Control.

Please click on the link below to view the document:

Fanuc Serial Cable Wiring for a 25pin-9pin Cable

Fanuc Serial Cable Wiring for a 25pin-25pin Cable

Here is the wiring diagram for RS-232 Serial Communications Cable, 25 pin to 25 pin, for connecting a computer to a Fanuc Control.

Please click on the link below to view the document:

Fanuc Serial Cable Wiring for a 25pin-25pin Cable

Punching Offsets on a Fanuc 16i 18i 21i 21MB Control

Here is the procedure for punching the Offsets (Uploading the Offsets back to a computer) on a Fanuc 16i 18i 21i 21MB control.

Please click on the link below to view the document:

Punching Offsets on a Fanuc 16i 18i 21i 21MB Control

 

Punching Offsets on a Fanuc 15M Control

Here is the procedure for punching the Offsets (Uploading the Offsets back to a computer) on a Fanuc 15M control.

Please click on the link below to view the document:

Punching Offsets on a Fanuc 15M Control

Punching Programs on a Fanuc 10M-11M Control

Here is the procedure for punching the Program(s) (Uploading the Program(s) back to a computer) on a Fanuc 10M-11M control.

Please click on the link below to view the document:

Punching Programs on a Fanuc 10M-11M Control


Punching Programs on a Fanuc 6 MB Control

Here is the procedure for punching the Program(s) (Uploading the Program(s) back to a computer) on a Fanuc 6 MB control.

Please click on the link below to view the document:

Punching Programs on a Fanuc 6 MB Control


 

Punching Programs on a Fanuc 0 MC Control

Here is the procedure for punching the Program(s) (Uploading the Program(s) back to a computer) on a Fanuc 0 MC control.

Please click on the link below to view the document:

Punching Programs on a Fanuc 0 MC Control

Punching Parameters on a Fanuc 16i 18i 21i 21MB Control

Here is the procedure for punching the Parameters (Uploading the Fanuc Parameters back to a computer) on a Fanuc 16i 18i 21i 21MB control.

Please click on the link below to view the document:

Punching Parameters on a Fanuc 16i 18i 21i 21MB Control


Punching Parameters on a Fanuc 15M Control

Here is the procedure for punching the Parameters (Uploading the Fanuc Parameters back to a computer) on a Fanuc 15M control.

Please click on the link below to view the document:

Punching Parameters on a Fanuc 15M Control

 

Punching Parameters on a Fanuc 10M-11M Control

Here is the procedure for punching the Parameters (Uploading the Fanuc Parameters back to a computer) on a Fanuc 10M-11M control.

Please click on the link below to view the document:

Punching Parameters on a Fanuc 10M-11M Control


Punching Parameters on a Fanuc 6 MB Control

Here is the procedure for punching the Parameters (Uploading the Fanuc Parameters back to a computer) on a Fanuc 6 MB control 

Please click on the link below to view the document:

Punching Parameters on a Fanuc 6 MB Control


Punching Parameters on a Fanuc 0 MC Control

Here is the procedure for punching the Parameters (Uploading the Fanuc Parameters back to a computer) on a Fanuc 0 MC control.

Please click on the link below to view the document:

Punching Parameters on a Fanuc 0 MC Control

Changing Fanuc 16i 18i 21i 21MB Communications Parameters

Here is the procedure for checking or changing the Communications Parameters on a Fanuc 16i 18i 21i 21MB control.

Please click on the link below to view the document:

Changing Fanuc 16i 18i 21i 21MB Communications Parameters

Changing Fanuc 15M Communications Parameters

Here is the procedure for checking or changing the Communications Parameters on a Fanuc 15M control.

Please click on the link below to view the document:

Changing Fanuc 15M Communications Parameters


Changing Fanuc 10M-11M Communications Parameters

Here is the procedure for checking or changing the Communications Parameters on a Fanuc 10M-11M control.

Please click on the link below to view the document:

Changing Fanuc 10M-11M Communications Parameters


Changing Fanuc 0 MC Communications Parameters

Here is the procedure for checking or changing the Communications Parameters on a Fanuc 0 MC control.

Please click on the link below to view the document:

Changing Fanuc 0 MC Communications Parameters

Changing Fanuc 6 MB Communications Parameters

 Here is the procedure for checking or changing the Communications Parameters on a Fanuc 6 MB control.

Please click on the link below to view the document:

Changing Fanuc 6 MB Communications Parameters

 
Next

CNC Controllers