Technical documentation regarding the gridshifting of an axis for the CNC machines serviced by The Service Group.

 

TSG’s Gridshift Starter document for a twin table machine

Here is the TSG’s Gridshift Starter document for a twin table machine.

Please click on the link below to view the document:

Gridshift Starter document for twin table machines

 

Changing the gridshift (HOME) of an ATC Magazine with an NCV-1 Driver

Here is the procedure for changing the gridshift (HOME) of an ATC Magazine with an NCV-1 Driver.

Please click on the link below to view the document:

Changing the gridshift (HOME) of an ATC Magazine with an NCV-1 Driver

TSG’s Gridshift Starter document for a single axis or single table machines

Here is the TSG gridshift starter document for a single axis or single table machines.

Please click on the link below to view the document:

Gridshift Starter document for single axis or single table machines


 

Changing the gridshift (HOME) of an axis on a 5-axis Machine with a Fanuc 16i Control

Here is the procedure for changing the gridshift (HOME) of an axis on a 5-axis Machine with a Fanuc 16i Control.

Please click on the link below to view the document:

Changing the gridshift (HOME) of an axis on a 5-axis Machine with a Fanuc 16i Control

Changing the gridshift (HOME) of an ATC Magazine with a Mitsubishi Driver

Here is the procedure for changing the gridshift (HOME) of an ATC Magazine with a Mitsubishi Driver.

Please click on the link below to view the document:

Changing the gridshift (HOME) of an ATC Magazine with a Mitsubishi Driver


 

Changing the gridshift (HOME) of an axis on a 5-axis Machine with a Fanuc 15M Control

Here is the procedure for changing the gridshift (HOME) of an axis on a 5-axis Machine with a Fanuc 15M Control.

Please click on the link below to view the document:

Changing the gridshift (HOME) of an axis on a 5-axis Machine with a Fanuc 15M Control

 
 

Changing the gridshift (HOME) on an axis for a Twin Table Machine with a Fanuc 16i 18i Control

Here is the procedure for changing the gridshift (HOME) on an axis for a Twin Table Machine with a Fanuc 16i 18i Control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on an axis for a Twin Table Machine with a Fanuc 16i 18i Control

 

Changing the gridshift (HOME) on a single axis for a Fanuc 15M Control

Here is the procedure for changing the gridshift (HOME position)  on a single axis for a Fanuc 15M control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on a single axis for a Fanuc 15M Control

Changing the gridshift (HOME) on an axis for a Twin Table Machine with a Fanuc 15M Control

Here is the procedure for changing the gridshift (HOME) on an axis for a Twin Table Machine with a Fanuc 15M Control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on an axis for a Twin Table Machine with a Fanuc 15M Control

 

Changing the gridshift (HOME) on a single axis for a Fanuc 10M-11M Control

Here is the procedure for changing the gridshift (HOME position)  on a single axis for a Fanuc 10M-11M control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on a single axis for a Fanuc 10M-11M Control

Changing the gridshift (HOME) on a single axis for a Fanuc 16i 18i 21i 21MB Control

Here is the procedure for changing the gridshift (HOME position)  on a single axis for a Fanuc 16i 18i 21i 21MB control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on a single axis for a Fanuc 16i 18i 21i 21MB Control

 

Changing the gridshift (HOME) on a single axis for a Fanuc 6 MB Control

Here is the procedure for changing the gridshift (HOME position)  on a single axis for a Fanuc 6 MB control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on a single axis for a Fanuc 6 MB Control

 
 

Changing the gridshift (HOME) on a single axis for a Fanuc 0 MC Control

Here is the procedure for changing the gridshift (HOME position)  on a single axis for a Fanuc 0 MC control.

Please click on the link below to view the document:

Changing the gridshift (HOME) on a single axis for a Fanuc 0 MC Control

 
 
 
Previous

CNC Controllers
Next

Inverters